Here are a few of our best-sellers. If you don't see what you want — give us a call!

AT50RU
The AT50RU is a 50 gallon rectangular upright tank. It is constructed from .125 aluminum tread bright. It is designed to use very little bed space. This tank will fit a short or long bed. (18H x 12W x 60L).

AT90L
The AT90L is a 90 gallon L-shape tank. This tank comes with duel fill necks so you can fill this tank from either side or both sides. It can also works with trucks with over the rail style tool boxes with at least 9 inches below. It is constructed from .125 gauge aluminum tread bright.
(18H x 30W x 60L).

AT90L-TT
The AT90L-TT is a 90 gallon L-shape tank and tool box combo. This tank comes with duel fill necks so you can fill from either side or both sides. The fuel tank is constructed from .125 gauge aluminum tread bright. The AT90L-TT will fit a long bed only. The tool box features a single lid, duel stainless steel paddle latches, gas shocks, drivers side lock, and weather stripping. The AT90L-TT is 18H x 30W x 60L (the tool box portion is 9H x 20x 60L).

AT60WX-SB
AT60WX-SB is a 60 gallon extreme wedge or "See-Over" style tanks. This tank will fit either a short or long bed truck, (note: 05 to present dodge short bed trucks require this tank to be notched, call for details and prices). This tank comes with a driver's side fill neck and is constructed from .125 gauge aluminum tread bright. The AT60WX-SB is 18H x 18W x 60L.

DC Fuel transfer Pumps—SD Series
You get the ruggedness of cast iron and the portability of DC power. This pump delivers up to 13 GPM/49 LPM. The SD1202 is designed for tank or barrel mounting.

• Thermally protected, UL/cUL listed, explosion-proof, 1/4 HP motor
• 2" NPT, no tank adapter needed
• 3/4" x 10´ hose, manual nozzle and 15´ power cable
• 1" polymer adjustable suction pipe
  
• Positive displacement, rotary vane configuration
• Ball bearing construction, no lubrication required
• 30 minute duty cycle
• Pump may be padlocked
• Rain proof

.

DC Fuel transfer Pumps —Series 4200
12 Volt High-Flow Pump. In a world where time is money, the FR4210 saves you both. Thanks to its high flow rate of 20 GPM (76 LPM) and low 22 Amp draw, you’ll spend less time at the pump and more time accomplishing the task at hand.

• 1/4 HP, 12 Volt DC motor
• Built-in check valve, bypass valve and thermal expansion valve
• 1" diameter, 12´ hose and 1" manual nozzle
• Pump may be padlocked
• Corrosion-Proof adjustable section pipe
• Explosion-proof permanent magnet motor
• Thermal overload protection
• 30-minute duty cycle/not for continuous operation
• Ball bearing construction, no lubrication required
• Machined carbon vanes
• 2" threaded base for tank openings
• UL/cUL listed motor
• Rain proof

.